SG-6000 Series of Mechanical Thermostat
Introduction
The RTC70.xx iS used for 2-position contr01 with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat.the thermostat acquires the room temperatu re with its built-in sensor or floor sensor.and the heating contact will close when the room temperatu re falls below the selected setpoint.
Application
For the control of warm-water（floor）heating systems and direct electric heating systems used in Commercial buildings，Residential buildings，Light in dustrial buildings
Features
LED in dicator is light when heating is onwith manual switch and knob for easy ope ration On/off control output for heating device
Technical Data
Voltage:AC230V
Power consumption：5W
Setting range：4℃~45℃
Switching differential：±0.5K
Ambient temperature：-5℃-50℃
Protective housing:IP20
Housing material:self-exting uishing PC
Floor sensor:rubber-thermoplastic NTC sensor
Cable length is 3m
Related products
-
Single-Phase Multi-Function Power Meter (Conven...
Overview The single-phase multi-function meter can measure all the commonly used power parameters in the power grid system with high precision: single-phase voltage, single-phase current, active power, reactive power, power factor, grid frequency, active energy, reactive energy, and with communication Interface and energy pulse output function. Adopt MODBUS-RTU communication protocol to realize LED/LCD on-site display and remote RS-485 digital communication. It has the characteristics of conv...
-
Single-Phase Current (Design Version)
Overview The smart ammeter adopts AC sampling technology, which can measure the current in the power grid. It has the characteristics of convenient installation, simple wiring, convenient maintenance, small amount of engineering, field programmable input parameters, etc., and can complete the networking communication with different PLCs and industrial computers in the industry. Features Measurement: single-phase current Display: a row of LED digital / LCD liquid crys...
-
Capacitive transmitter
Model name Product specification Main features ◆Complete variety, high precision, good stability, cheaper price than similar imported instruments; ◆Span and zero position can be continuously adjusted externally; ◆Positive migration up to 500%, negative migration up to 600% (minimum range); ◆Adjustable damping; It ca...
-
Electricalfirebuilt-in
Basic function The electrical fire monitoring detector can realize real-time monitoring and collection of the residual current and temperature value of the controlled circuit, and will send out an audible and visual fault alarm signal when the fault alarm data of the detection circuit is collected; it can also be networked with the electrical fire monitoring host, and the monitoring host can judge The state of the on-site detector, the host computer analyzes and processes to indicate the type...
-
Electronic Relay SM 010(24VDC+48VDC)
●High DC switching capacity ●Variety of applications ●Compact design ●Simple connection ●Clip fixing Electronic relay for switching DC appliances with high switching capacity，A separate conventional switch contact is used as controller（e.g temperature regulator，humidity regulator）The electronic relay is available in 24VDC and 48VDC versions. Technical Data Contact type Contact maker,normally open(Relay/MOSFET) Contact resistance <10mΩ Service life >...
-
Vertical microcomputer protection device
Model Description Product Features Overview This microcomputer comprehensive protection and control device is suitable for power networks of 35KV and below, and provides protection, control, measurement and monitoring functions for transmission lines, transformers, capacitors, motors and other main equipment. In the equipment, the screen can be grouped together in a centralized manner, and it can also be installed in a...
