OEM High Quality Single Phase Wattmeter Manufacturers - Active and Reactive Frequency Table (Regular) – Newlink
OEM High Quality Single Phase Wattmeter Manufacturers - Active and Reactive Frequency Table (Regular) – Newlink Detail:
Smart Frequency Meter Instruction Manual
Product Features
1. The whole four-digit display
2. Optional with communication function, communication address, baud rate
3. Software adjustment, no internal potentiometer, high precision
4. Software adjustment, no internal potentiometer, high precision
Matters needing attention
1. Before use, the meter needs to be powered on for 15 minutes.
2. Pay attention to prevent vibration and impact, and do not use it in places with excess dust and excess harmful gases.
3. The input wire should not be too long. If the input end of the signal under test is long, please use a twisted pair shielded wire.
4. If the signal is accompanied by high frequency interference, a low frequency filter should be used in the line.
5. When not in use for a long time, please turn on the power for no less than 4 hours every three months.
6. Long-term storage should avoid direct light, and should be stored at -10℃~70℃.
7. If there is no display on the meter, first check the auxiliary power supply to see if the voltage is within the specified range.
8. If the display is abnormal, check whether the input signal is normal and whether the signal terminals are tightened.
9. Unless the PT has enough power, the PT signal cannot be used as an auxiliary power supply at the same time to ensure the normal operation of the instrument.
10. The screws of the current terminals in the CT circuit must be tightened to ensure reliable contact between the incoming and outgoing wires to avoid malfunctions.
Overview
Product In Kind
External Dimensions
Product detail pictures:
Related Product Guide:
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of OEM High Quality Single Phase Wattmeter Manufacturers - Active and Reactive Frequency Table (Regular) – Newlink , The product will supply to all over the world, such as: Jersey, venezuela, Georgia, Our Company policy is quality first, to be better and stronger, sustainable development . Our pursuit goals is for society, customers, employees, partners and enterprises to seek reasonable benefit. We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Megan from South Korea - 2018.06.18 19:26
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
By Julia from Turkmenistan - 2018.06.18 19:26
Related products
-
OEM High Quality Digital Voltmeter Factories -...
Overview Using AC voltage technology, it is possible to measure the three voltage phases in the power grid, and simply compare them through the panel setting rate. Features, and can complete the network communication with similar PLC and industrial computer. Features Measurement: Three-phase voltage Display: Three rows of LED digital / LCD liquid crystal display A, B, C three-phase voltage Uses: suitable for power grid, automatic control system. Low-voltage three-phase current measurement cir...
-
OEM High Quality Dc Digital Voltmeter Ammeter M...
ltem/Model (Emerald Backlight) (white backight optional negative display white characters) Shape Working power DC5V±5%≤15mA AC/DC9V-12V AC/DC24V DC5V±5%≤15mA AC/DC9V-12V AC/DC24V Dimensions (WwH’Dmm) 79×42.5×25.5 79×42.5×25.5 Mounting hole(mm) 75×39.5 75×39.5 Measurement accuracy ±0.2% of full scale value ±2 words(DC) +0.5% full scale value ±5 words (AC) ±0.2% of full scale value +2 words(DC) ±0.5% full scale value 15 words(AC) Basic rangeo DC voltage (direct inpu...
-
OEM High Quality Fiber Optic Power Meter Manufa...
Overview The single-phase multi-function meter can measure all the commonly used power parameters in the power grid system with high precision: single-phase voltage, single-phase current, active power, reactive power, power factor, grid frequency, active energy, reactive energy, and with communication Interface and energy pulse output function. Adopt MODBUS-RTU communication protocol to realize LED/LCD on-site display and remote RS-485 digital communication. It has the characteristics of conv...
-
ODM Motor Protector Supplier - Common Type Tem...
Application
-
ODM Open Circuit Protection Factory - Common T...
Application
-
OEM High Quality 3 Phase Motor Protection Circu...
Application
