Intelligent Dehumidification Deviceintelligent Oil Pumping Deviceconventional
Summary
Intelligent dehumidification device is the use of semiconductor refrigeration dehumidification mode, the closed space of the wet air in the fan under the action of the fan, the air water vapor through the semiconductor refrigeration mechanism after condensing into water, and then eliminate the cabinet through the guide pipe, can achieve a good dehumidification effect.
Cooling type: F01 is set at 0. Meanwhile, the dehumidification device is automatically started when the ambient humidity is below the lowest humidity value (humidity setting value minus the humidity return value).When the ambient temperature is higher than the set temperature maximum value (the temperature setting value), the fan heat dissipation begins to start, and when the temperature is below the set temperature value (the temperature setting value minus the temperature return value), the cooling fan stops working.
Heat up type: When F01 sets 1, when the ambient temperature is below the set minimum temperature value (temperature setting value), the temperature starts to start, when the temperature is higher than the highest temperature value (temperature setting value plus temperature return value) temperature increase stops.The humidity value is condensed and set. When the ambient humidity is higher than the set humidity maximum (set humidity), the dehumidification is stopped when the lowest humidity, the dehumidifier until the function is turned off manually.
Anti-frost icing function: monitor the working surface temperature of condensation surface in real time to prevent the temperature of condensation surface from freezing and frost during dehumidification work, and affect the drainage effect.
Air circulation function: the temperature and humidity of various parts of the air static state in the cabinet are different. The dehumidifier provides the air circulation function in the cabinet, so that the temperature and humidity in each position in the cabinet are more average, and can more effectively monitor the humidity and ambient temperature in the air in the cabinet.
Technical Parameter
|
input specification |
The 1-way temperature and humidity input module |
working power supply |
AC/DC 85-260V |
|
measuring range |
Temperature: -40℃ -120℃; humidity: 5%RH-95%RH |
Product power |
Power is 60W at starting the dehumidification |
|
resolving power |
Temperature was 0.1℃, and the humidity was 1%RH |
work environment |
Corcorrosive with temperature 0-50℃, humidity 85%RH |
|
control method |
stepping control |
intrinsic error |
|
|
Output specification |
1 relay output, 250VAC / 3A or 30VDC / 3A |
Humidity: ± 3%RH (10%RH-90%RH), ± 5%RH (0%RH-99%RH) |
Installation and wiring
3.1. Controller wiring and dimension diagram
Temperature and humidity sensing dimension diagram:
Application
|
product name |
product model |
basic function |
remarks |
|
|
Mini-type intelligent dehumidification loading penalty |
NLK-CS8000 |
|
Intelligent dehumidification device for flame-retardant plastic shell Heating power: 50-500W Humidity detection range: 20%RH-98%RH; Deval efficiency: 450ml / day (20W35℃ RH=80% working condition) |
High * wide * deep 87mm*71mm*51mm |
|
Plastic type intelligent dehumidification installation penalty |
NLK-CS800 |
|
Heating power: 50-500W Humidity detection range: 20%RH-98%RH; Removal efficiency: 450ml / day (60W35℃, RH=80% working condition) |
High * wide * deep 87mm*71mm*51mm |
|
Plate and gold type intelligent dehumidification installed Shu |
NLK-CS810 |
|
High * wide * deep 87mm*71mm*51mm |
|
|
Aluminum alloy type intelligent dehumidification device |
NLK-CS820 |
|
High * wide * deep 87mm*71mm*51mm |
|
|
Stainless steel type intelligent dehumidification pack slang |
NLK-CS830 |
|
High * wide * deep 87mm*71mm*51mm |
|
Related products
-
Indoor High Voltage Live Display Fault Indicator
The main function 1. Short-circuit current alarm: The short-circuit current sensor detects the running high-voltage cable online during operation, When the line current reaches or exceeds the set value (which can be adjusted before leaving the factory according to user needs), short-circuit The sensor sends an alarm signal and transmits it to the host through the optical fiber. After the host receives the signal, it will be displayed on the panel The corresponding alarm indication signal is i...
-
Small Current Grounding Line Selection Device
Model and parameters and service environment Table 1 of Technical Parameters of Small Current Line Selection Device Technology, technique, reference, and mark Technology, technique, reference, and number Prepare, note working voltage AC/DC:85V~265V Input the opening zero-order voltage, U0x 0~150V The measurement accuracy is 1% Enter zero-order current 20mA~3A The measurement accuracy was 0.5% Select line range There are 54 bus rou...
-
Current Transformer Secondary Overvoltage Prote...
scope of application Current transformer secondary overvoltage protector is mainly suitable for differential winding, overcurrent winding, measurement winding, bus protection winding and backup winding of CT secondary side. It is used to inhibit transient overvoltage below impact overvoltage of the equipment and discharge surge energy, so as to protect the system circuit and equipment. Normal service conditions and installation conditions 1. Normal service conditions...
-
Indoor High Voltage Live Display
Product Details Overview This product is a HX2 phase comparator (PC) designed and produced by our company according to the requirements of users, which is used in conjunction with the DXN80 series of indoor high-voltage live display devices (the indicator panel sets the phase test end). It is suitable for substations and power distribution stations (especially when cables enter the line) that are equipped with dual power supplies and multiple power supplies for in...
-
Intelligent Dehumidification Device Intelligent...
Overview Intelligent dehumidification device is the use of semiconductor refrigeration dehumidification mode, the humid air in the closed space under the action of the fan inhalation dehumidification air duct, the water vapor in the air through the semiconductor refrigeration mechanism condensed into water, and then through the guide pipe through the cabinet, can achieve a good dehumidification effect. When there is no manual open dehumidification function: when the ...
-
Microcomputer Harmonic Elimination Device
Functions and Features ●Modular design, compact structure, advanced technology, high-speed 32-bit ARM core processor ensures real-time operation and action accuracy. ●Real-time monitoring of system status, real-time calculation, accurate judgment of low-frequency, fundamental frequency, high-frequency resonance faults in the system, and timely action. ●Real-time display of three-phase voltage, opening voltage, can accurately determine grounding, overvoltage and under...
