Mechanical Thermostat FZK 011
●Adjustable temperature
●High switching capacity
●Small hysteresis
●Terminals easily accessible
●Clip fixing
●Change-over contact
The mechanical thermostat is used for controlling heating and cooling equipment,filter fans or signal devices.The thermostat registers the surrounding ai r and can switch both inductive and resistive loads via snap-action contact.
Technical Data | |
Switch temperature difference | 4K(±1.5K tolerance) |
Sensor element | Thermostatic bimetal |
Contact type | snap-action contact |
Contact resistance | <10mΩ |
Service life | >100,000 cycles |
Max Switching capacity NC | 250V AC,10(4)A 120V AC,10(4)A DC 30W |
Max Switching capacity. NC | 250VAC,5(2)A 120V AC,5(2)A DC 30W |
EMC | Acc to EN 55014-1-2. EN 61000-3-2. EN 61000-3-3 |
Connection | 4-pole terminal,clamping torque 0.5Nm max.rigid。wire 2.5mm² stranded wire(with wire end ferrule)1.5mm² |
Mounting | clip for 35mm DIN rail. EN60715 or for exit filter EF 118 Series |
Casing | Plastic according to UL94 V-0 fire rating, plastic according to UL94 V-0 light gray |
Dimensions | 67x50x38mm |
Weight | Approx.100g |
Fitting position | Variable |
Operating Strage temperature | -20 to+80°C(- -4 to+176°F)/-45 to+80°C( -49 to+176°F) |
Protection type | IP20 |
Connecting terminal "N"(RF heating resistor) causes thermal feedback to work and so reduces the switch temperature difference to approx.0.5k
product name |
product model |
basic function |
remarks |
|
Mechanical temperature controller |
FZK 011 |
A mechanical thermostat is used to control heaters and air cooler or signaling devices |
Length * width * height 50 * 47 * 38 |
Write your message here and send it to us