Semiconductor Fan Heater Cr027 UP To 650W
●Compact heater
●Heating capacity adjusts to ambient temperature
●Adjustable temperature range
●Clip fixing
●Optical indicator
● Temperature safety cut-out
Semiconductor fan heaters prevent the formartion of condensation and ensure en even temperature in switch and control equipment，The bulit-in regulator is used to set the desired temperature.
| Technical Data | |
| Heater body | PTC resistor,self regulating and temperature limiting |
| Temperature safety cut-out | Overheat protection to protect against overheating in case of fan failure |
| Axial fan，ball bearing | The air volume is shown in the following chart airflow see table
service life 50,000h at 25°C(77°F) |
| Connection | Two-stage screw connector wire thickness 2.5mm² maximum torque 0.8Nm |
| Casing | Light gray plastic, UL94V-0 standard, V -0 fire rating |
| Optical indicator | thermostat control lamp |
| Mounting | 35mm DIN rail installation, clip for 35mm DIN rail, EN 6071 5 |
| Fitting position | vertical |
| Dimensions | 100×128×165mm |
| Operating/sforage temperature | -45 to+70℃(-49 to+158°F) |
| Protection type/Protection class | IP20/lI(double insulated) |
Related products
-
Microcomputer Harmonic Elimination Device
Functions and Features ●Modular design, compact structure, advanced technology, high-speed 32-bit ARM core processor ensures real-time operation and action accuracy. ●Real-time monitoring of system status, real-time calculation, accurate judgment of low-frequency, fundamental frequency, high-frequency resonance faults in the system, and timely action. ●Real-time display of three-phase voltage, opening voltage, can accurately determine grounding, overvoltage and under...
-
Current Transformer Secondary Overvoltage Prote...
scope of application Current transformer secondary overvoltage protector is mainly suitable for differential winding, overcurrent winding, measurement winding, bus protection winding and backup winding of CT secondary side. It is used to inhibit transient overvoltage below impact overvoltage of the equipment and discharge surge energy, so as to protect the system circuit and equipment. Normal service conditions and installation conditions 1. Normal service conditions...
-
Indoor High Voltage Live Display
Product Details Overview This product is a HX2 phase comparator (PC) designed and produced by our company according to the requirements of users, which is used in conjunction with the DXN80 series of indoor high-voltage live display devices (the indicator panel sets the phase test end). It is suitable for substations and power distribution stations (especially when cables enter the line) that are equipped with dual power supplies and multiple power supplies for in...
-
Touch-safe Heater CSF 060 Series 50W-150W
●Low surface temperature ●Quick mounting due to clip fixing ● Doble insu lated（plastic） ●Wide ovltage range ●Small size ●Integrated thermostat Touch-safe heater for the use in enclosures with electrical-electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air.The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.This model with p...
-
Three-Phase Ammeter (Design Model)
Overview The three-phase ammeter adopts the AC sampling technology to measure the true RMS value, and can measure the three-phase current in the power grid. It has the characteristics of convenient installation, simple wiring, convenient maintenance, small amount of engineering, field programmable input parameters, etc., and can complete the networking communication with different PLCs and industrial computers in the industry. Features Measurement: Three-phase curren...
-
Three-Phase Ammeter (Conventional)
Overview The three-phase ammeter adopts the AC sampling technology to measure the true RMS value, and can measure the three-phase current in the power grid. It has the characteristics of convenient installation, simple wiring, convenient maintenance, small amount of engineering, field programmable input parameters, etc., and can complete the networking communication with different PLCs and industrial computers in the industry. Features Measurement: Three-phase curren...
