Touch-safe Heater CSF 060 Series 50W-150W
●Low surface temperature
●Quick mounting due to clip fixing
● Doble insu lated（plastic）
●Wide ovltage range
●Small size
●Integrated thermostat
Touch-safe heater for the use in enclosures with electrical-electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air.The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.This model with plug-in thermostat does not require additional wiring.The heaters are designed for perm-anent operation.This heater is also available in a ve rsion without thermostat（CS 060）.
| Technical Data | |
| Operating voltage | 120-240V AIG/DC*(min.110V, max.265v) |
| Heating capacity | see table |
| Heater elementy | PTC resistor-temperature limiting |
| Surface temperature | <80~C(176°F)，except upper protective grille |
| Connection | 4-pole terminal 2.5mm²torpue 0.8Nm max. |
| Casing | Black plastic, UL94V-0 compliant. V-0 fire rated Plastic according to UL94-V-0, black |
| Mounting | clip for 35mm DIN rail，EN 50022 |
| Fitting position | Vertical |
| Operating/storage tmperature | -20 to+70℃(-4 to+158°F)/-45 to+70℃(-49 to+158°F) |
| Ptotection type/Protection class | IP20/ll(double insulated) |
| Note | other voltages on request |
*Operating with voltages below 140V AC/DC reduces heating performance by approx.10%
Related products
-
Single-Phase Multi-Function Power Meter (Conven...
Overview The single-phase multi-function meter can measure all the commonly used power parameters in the power grid system with high precision: single-phase voltage, single-phase current, active power, reactive power, power factor, grid frequency, active energy, reactive energy, and with communication Interface and energy pulse output function. Adopt MODBUS-RTU communication protocol to realize LED/LCD on-site display and remote RS-485 digital communication. It has the characteristics of conv...
-
Three-Phase Ammeter (Design Model)
Overview The three-phase ammeter adopts the AC sampling technology to measure the true RMS value, and can measure the three-phase current in the power grid. It has the characteristics of convenient installation, simple wiring, convenient maintenance, small amount of engineering, field programmable input parameters, etc., and can complete the networking communication with different PLCs and industrial computers in the industry. Features Measurement: Three-phase curren...
-
Fire power host
Overview The fire equipment power supply status monitoring host is researched and developed according to the national standard “Fire Equipment Power Supply Monitoring System” and is specially used for real-time monitoring of the fire equipment power supply status. The fire equipment power supply status monitor, voltage signal sensor and current signal sensor form a fire equipment power supply monitoring system, which can monitor the working status of the fire equipment power suppl...
-
Power Transmitter
Naming meaning General technical indicators Citation Standards and Rules GB/T13850-1998 Input overrange Continuous: 1.2 times; Instantaneous: current 10 times (5 seconds), voltage 2 times (10 seconds) Enter frequency 50/60Hz±10% Insulation strength AC 2kV Isolation withstand voltage Between standard input and output: AC 1KV; power supply and input, power supply and output: AC 2KV Insulation resistance ≥1000 Output ri...
-
Single-phase rail energy meter
Safety Guidance Information about your personal safety Due to different conditions or requirements, this manual cannot cover all the safety matters related to the operation of this instrument, but it is very important to understand the following items to ensure your personal safety and prevent damage to the instrument. These items are highlighted with a triangular safety symbol, depending on the degree of potential hazard indicated. ...
-
Electronic Thermostat ET 011(24VDC)
●High DC breaking capacity ●Low hysteresis ●Adjustable temperature ●Change-over contact ●Clip fixing Electronic thermostat for regulating high performance DC 24V equipment.Heating or cooling appliances as well as signal devices can be switched via the potential free change-over contact.In comparison to mechanical thermostats.the ET011 has a low hysteresis making the switching point and setting accu racy more precise. Technical Data Switch temperature differen...
