SmallSemiconductor Heater RC 016 Series 8W10W,13W
●Temperature limiting
●Wide voltage range
●Dynamic heating up
●Energy saving
●Compact
These small heaters are designed to prevent condensation and to ensure a minimum operating temperatu re in small enclosures.
| Technical Data | |
| Operating voltage | 120-240V AC/DC (110V minimum, 265V maximum) |
| Heating element | PTC resistors, auto-tuning and temperature limiting |
| Heater body | aluminium,anodised |
| Mounting | Screw installation |
| Fitting position | Arbitrarily |
| Operating/Storage temperature | -45 to+70℃(-49 to+158°F) |
| Protection typelProtection class | IP32/Ⅱ(double insulation) |
| Note | Other voltage requirements |
*Operating with voltages below 140V AC/DC reduces heating performance by approx.10%
Related products
-
Three -Phase Voltage Table (Design Model)
Overview Using AC voltage technology, it is possible to measure the three voltage phases in the power grid, and simply compare them through the panel setting rate. Features, and can complete the network communication with similar PLC and industrial computer. Features Measurement: Three-phase voltage Display: Three rows of LED digital / LCD liquid crystal display A, B, C three-phase voltage Uses: suitable for power grid, automatic control system. Low-voltage three-pha...
-
Single-phase Ammeter (Conventional)
Overview The smart ammeter adopts AC sampling technology, which can measure the current in the power grid. It has the characteristics of convenient installation, simple wiring, convenient maintenance, small amount of engineering, field programmable input parameters, etc., and can complete the networking communication with different PLCs and industrial computers in the industry. Features Measurement: single-phase current Dis...
-
Dual Thermostat ZR 011
●NO and NC in one casing ● Separate adjustable tempe ratures ●High switching capacity ●Terminals easily accessible ●Clip fixing Two thermostats in one casing： Thermostat（contact breaker，normally closed）for regulating heaters. Thermostat（contact maker，normally open）for regulating filter fans and heat exchangers or switching signal devices when temperature limit has been exceeded. Heaters and cooling equipment can be switched independently from each orther with ...
-
Intelligent Dehumidification Deviceintelligent ...
Summary Intelligent dehumidification device is the use of semiconductor refrigeration dehumidification mode, the closed space of the wet air in the fan under the action of the fan, the air water vapor through the semiconductor refrigeration mechanism after condensing into water, and then eliminate the cabinet through the guide pipe, can achieve a good dehumidification effect. Cooling type: F01 is set at 0. Meanwhile, the dehumidification device is automatically start...
-
Fire power supply
Basic skills The voltage/current signal sensor can collect the voltage and current value of the detection circuit at the same time, or only collect a certain circuit or a few channels according to actual requirements. It can be networked with the fire-fighting equipment power monitoring host, and the monitoring host can judge the status of the on-site sensor. Status, after the host computer analyzes and processes, it indicates the type of a circuit fault alarm, and sends out an audible and vi...
-
Intelligent Dehumidification Device Intelligent...
Overview Intelligent dehumidification device is the use of semiconductor refrigeration dehumidification mode, the humid air in the closed space under the action of the fan inhalation dehumidification air duct, the water vapor in the air through the semiconductor refrigeration mechanism condensed into water, and then through the guide pipe through the cabinet, can achieve a good dehumidification effect. When there is no manual open dehumidification function: when the ...
