Small Semiconductor Heater HGK 047 Series 10W to 30W
●Dynamic heating up
●Energy saving
●Wide voltage range
●Temperature limiting
●Clip fixing
The heaters are used in enclosu res where condensation is to be prevented or the temperatu re may not fall below a minimum value.In this way corrosion is avoided and an even temperature is ensured.
| Technical Data | |
| Heating element | PTC heating element, self-regulation and temperature control |
| Heater body | Extruded aluminium profile，anodised |
| Mounting | 35mm DIN rail, EN 50022clip for 35mm DIN rail, EN 60715 |
| Fitting position | Vertical direction |
| Operating/Storage temperature | - 20 to+70°C(-4 to+158°F) |
| Protection type | I P54/(earthed) |
| Operating voliqge | 120- 240V AC (minimum 110V, maximum 265V) |
Related products
-
Touch-safe Heater CSF 060 Series 50W-150W
●Low surface temperature ●Quick mounting due to clip fixing ● Doble insu lated（plastic） ●Wide ovltage range ●Small size ●Integrated thermostat Touch-safe heater for the use in enclosures with electrical-electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air.The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.This model with p...
-
Smart Control Template
Overview 1.1 Intelligent lighting control panel, including eight touch keys, including eight on-off keys, communication address setting keys, full-on and full-on keys, and twenty function indicator lights. 1.2 The communication adopts the CAN bus communication method, with its own full-on/full-off control, used in conjunction with the intelligent lighting control module, and has remote programming and management functions. The intelligent lighting control panel is a ...
-
Small Current Grounding Line Selection Device
Model and parameters and service environment Table 1 of Technical Parameters of Small Current Line Selection Device Technology, technique, reference, and mark Technology, technique, reference, and number Prepare, note working voltage AC/DC:85V~265V Input the opening zero-order voltage, U0x 0~150V The measurement accuracy is 1% Enter zero-order current 20mA~3A The measurement accuracy was 0.5% Select line range There are 54 bus rou...
-
Wireless Temperature Measurement Device
Product description This product is a new concept wireless temperature measuring device for switch cabinets. It has powerful functions and is suitable for various switch cabinets such as central cabinets, handcart cabinets, fixed cabinets, and ring network cabinets in 3-35KV indoors. This product adopts the intelligent control of single-chip microcomputer, which can collect the temperature and humidity in the cabinet in real time, and automatically adjust the tempera...
-
Indoor High Voltage Live Display Fault Indicator
The main function 1. Short-circuit current alarm: The short-circuit current sensor detects the running high-voltage cable online during operation, When the line current reaches or exceeds the set value (which can be adjusted before leaving the factory according to user needs), short-circuit The sensor sends an alarm signal and transmits it to the host through the optical fiber. After the host receives the signal, it will be displayed on the panel The corresponding alarm indication signal is i...
-
Touch-safe Heater CS 060 Series 50W-150W
●Low surface temperature ●Quick mounting due to clip fixing ●Doble insu lated(plastic) ●Wide ovltage range ●Small size Touch-sateh neater for the use In enclosures With electrical / electronlcal components. The deslgn of the heater supports the natural convection whlch results In a hlah air-Current of warm alr. The surface temperatures on tne accesslble side surfaces of the housing are kept down as a result of the heater design. Our complete range of thermostats and ...
