Mechanical Hygrostat MFR 012
●Adjustable relative humidity
●Change-ove r Contact
●High switching capacity
●Easily accessible te rminals
●Clip fixinq
The electromechanical hygrostat MRF 012 is designed to control enclosure heaters sothat the dew point is raised when a critical relative humidity of 65%is exceeded.
In thisway condensation and corrosion is effectively prevented.
Technical Data | |
Switch difference | 4% relative humidity (±3% tolerance) |
Permissible air velocity | 15m/sec |
Contact type | change-over contact |
Contact resistance | <10mΩ |
Service life | >100000 cycles |
Min. switching capacity | 20V AC/DC 100mA |
Max.switching capacity | 250VAC,5(1)A |
DC 20W | |
EMC | Conforms to EU EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 standards |
Connection | 3-pole terminal for 2.5mm. clamping torque 0.5Nm max: rigid wire 2.5mm². stranded wire(with wire end ferrule)1.5mm² |
Mounting | clip for 35ram DIN rail,En50022 |
Casing | plastic according to UL94 V-0, light gray UL94 V-0 light gray plastic |
Dimensions | 67 ×50 x 38mm |
Weight | Approx. 60g |
Fitting position | Variable |
Operating/Storage temperature | 0 to+60°C(+32 to+ 140°F)/-20 to+80°C(-4 to+176°F) |
Protection type | IP20 |
*at 50% RH |
Art.No. |
Setting range humidity |
01220.0-00 |
35 to 95% RH |
Write your message here and send it to us