Pressure Compensation Device DA 084
●High degree of protection
●Easy to insta
①It has become more and more important to provide a protected enclosure environment for valuable and crucial electrical and electronic components.
②In a tightly closed enclosure.pressure differentials can occur during extreme temperatu re variations.such as day/night operation.
③hen this occurs,the risk of dust and humidity being absorbed into the control panel increases dramatically.
④The specially designed pressure compensation plug DA 084 permits a controlled change in pressure.
⑤It can be installed easily in any enclosure.Because of the pressure compensation plug's high degree of protection(IP45),the protection type of the enclosure will not be affected
Technical Data | |
Mounting | PG29 thread with union nut |
Material | Material V-0 fire rating according to UI94 standard |
Air interface | Approx.7cm² |
Dimensions | Φ65.5×30.5mm |
Fitting position | variable |
perating/Storage temperature | -45 to+700℃(-49 to+158°F) |
Instllation
Make cut-out∅37﹢¹m in enclosure wall and mount pressure compensation device with nut.Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure.For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.