SK3110.000 Series of Electronic Thermostat
Inner temperature controller for switchgear cabinet
Especially used for controlling fan filter，heater and exchanger.also could be monitoring the electric cabinetinner temperature when working as signal arcuser.
Technical Data
Make bimetal sensor as heat sensitivity set to feedback of heat.
Contact point scheme:single switch over contact point as instant switch component allowed load of contact point
KL5-3 ACI0（4）A
DC=30WKL5-4（Cooling）
AC5（4）DA DC=30W
（D）=sensitivity load at COS∅ =0.6
◆Adjusting range：+50℃ to+60℃
◆Weight：105 gappr
◆Size：70?0?3.5mm
◆Switch discrepancy”1K?.8K
◆Voltage scope is wide，any type could be used from 24V to 230V
◆Time-saving connection.terminal block could be installed with screw from outside
◆Easy installation.could be installed to 35mm din rail vertically or horizontally. according to En50022.it could be clipped to NS/35-ES cabinet profile its accessory adapter.
Related products
-
Intelligent Dehumidification Device Intelligent...
Overview Intelligent dehumidification device is the use of semiconductor refrigeration dehumidification mode, the humid air in the closed space under the action of the fan inhalation dehumidification air duct, the water vapor in the air through the semiconductor refrigeration mechanism condensed into water, and then through the guide pipe through the cabinet, can achieve a good dehumidification effect. When there is no manual open dehumidification function: when the ...
-
Small Semiconductor Heater HGK 047 Series 10W t...
●Dynamic heating up ●Energy saving ●Wide voltage range ●Temperature limiting ●Clip fixing The heaters are used in enclosu res where condensation is to be prevented or the temperatu re may not fall below a minimum value.In this way corrosion is avoided and an even temperature is ensured. Technical Data Heating element PTC heating element, self-regulation and temperature control Heater body Extruded aluminium profile，anodised Mounting 35mm DIN rail, EN 50022c...
-
Indoor High Voltage Live Display Fault Indicator
The main function 1. Short-circuit current alarm: The short-circuit current sensor detects the running high-voltage cable online during operation, When the line current reaches or exceeds the set value (which can be adjusted before leaving the factory according to user needs), short-circuit The sensor sends an alarm signal and transmits it to the host through the optical fiber. After the host receives the signal, it will be displayed on the panel The corresponding alarm indication signal is i...
-
A Series Three-Phase 380V Frequency Converter
Function Description Name Function Description Edit/exit Level 1 menu entry or exit Confirm Enter the menu screen, set the parameters to confirm Numerical addition/subtraction Data or function code increment/decrement Displacement In the stop display interface and the running interface, you can move to the left to cyclically select the displayed parameters. When modifying the param...
-
Indoor High Voltage Live Display
Product Details Overview This product is a HX2 phase comparator (PC) designed and produced by our company according to the requirements of users, which is used in conjunction with the DXN80 series of indoor high-voltage live display devices (the indicator panel sets the phase test end). It is suitable for substations and power distribution stations (especially when cables enter the line) that are equipped with dual power supplies and multiple power supplies for in...
-
Capacitive transmitter
Model name Product specification Main features ◆Complete variety, high precision, good stability, cheaper price than similar imported instruments; ◆Span and zero position can be continuously adjusted externally; ◆Positive migration up to 500%, negative migration up to 600% (minimum range); ◆Adjustable damping; It ca...
